FRAGEN SIE UNS
Beschreibung

Industrial 8-port slim type unmanaged Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E.


IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080A switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

IGPS-1080A can be used in connecting several PoE P.D. Ethernet devices like IP-Camera or other Ethernet devices. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation.

• Provides 8x10/100/1000Base-T(X) PoE (P.S.E.) ports
• Supports P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled
• Supports Jumbo frame up to 9KBytes
• Supports wide temperature -40~70 degree for harsh environment
• Supports 50~57VDC redundant power input and reply output

Spezifikation

Filterkriterien

Zollnummer
85176200
Applikationen
Gebäude Automation
Ethernet
Gigabit
Ports gesamt
08
Ports RJ45
08
Ports SFP
00
Ports Fiber
00
POE
P.S.E.
Management
unmanaged
Status
Standard
Hersteller
ORING

Spezifikation

Physical Ports
10/100/1000Base-T(X) Ports in RJ45 With P.S.E.
8
Technology
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table
2048 MAC addresses
Processing
Store-and-Forward
LED Indicators
Power Indicator 
Green : Power LED x 2
Fault Indicator 
Amber : Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator
Green for port Link/Act.
Green for PoE power injected.
Fault contact
Relay
Relay output to carry capacity of 1A at 24VDC
DIP-Switch
DIP-Switch 1
Power-1 failed warning : (ON) enable, (OFF) disable
DIP-Switch 2
Power-2 failed warning : (ON) enable, (OFF) disable
Power
Redundant Input power
Dual DC inputs. 50VDC on 6-pin terminal block.
Power consumption (Typ.
8 Watts (power device not included)
Overload current protection
Present
Reverse polarity protection
NOT Present
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
26.1(W) x 94.9(D) x 144.3(H) mm
Weight (g)
390 g
Environmental
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Temperature
-40 to 70°C (-40 to 158°F)
Operating Humidity
5% to 95% Non-condensing
Regulatory approvals
EMI
FCC Part 15, CISPR (EN55022) class A
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Safety
EN60950-1
Warranty
5 years
Zubehör