FRAGEN SIE UNS
Beschreibung

Industrial 4-port secure serial to Ethernet device server with 4xRS-422/485 (2KV isolation) and 2x10/100Base-T(X), 1-port PoE P.D.


IDS-5042-I+ is an innovative secure 4-port RS-422/485 to 2 ports LAN secure device server with isolation featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DSTool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5042-I+ can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS- 5042-I+ features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.

IDS-5042-I+ supports RS-422/485 and provides dual redundant power inputs, 12~48 VDC, on terminal block to guarantee a non-stop operation. RS- 422/485 serial ports are with 2KV isolation. Further, IDS-5042-I+ features PoE P.D. (Power Device) function, compliant with IEEE802.3af standard, with 1kv isolation on the PoE port. With wide operating temperature, -10~70°C, and rugged IP-30 housing design, IDS-5042-I+ could operate in the harsh industrial environment. Therefore, IDS-5042-I+ is the best solution to the high demand of secure serial to Ethernet critical data communication.

• Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
• Redundant multiple host devices : 5 host devices : Virtual COM, TCP Server, TCP Client mode; 4 IP ranges : UDP
• NAT Pass-Through : the user can manage IDS-5042-I+ through NAT router
• Security : SSL data encryption ; secured management by HTTPS and SSHIP Access; IP White List
• Internet Communication : PPPoE authentication
• Update DNS Hostname : DDNS
• Dual redundant Ethernet port support redundant mode(Recovery time < 10ms)
• Ethernet switch mode enable Daisy Chain
• Event Warning by Syslog, Email, SNMP trap, and Beeper
• Configurable by Web-based and Windows utility (DS-Tool)
• 2KV isolation for RS422/485 serial ports
• 1KV isolation for PoE P.D. port
• Various Windows O.S. supported : Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/Windows 7(32/64bit)

Spezifikation

Filterkriterien

Zollnummer
84733020
Ethernet
Fast
Ports gesamt
02
Ports RJ45
02
Ports SFP
00
Ports Fiber
00
POE
P.D.
RS-422/485
04
Status
Archiviert
Hersteller
ORING

Spezifikation

ORing Media Converter Model
IDS-5042-I+
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
2
PoE P.D. port
PoE Present at ETH2
Power Device (IEEE 802.3af) : IEEE 802.3af compliant input interface
Over load and short circuit protection
Isolation Voltage : 1000 VDC min.
Isolation Resistance : 108 ohms min
Serial Ports
Connector
5-pin terminal block x 4
Operation Mode
RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool
Serial Baud Rate
110 bps to 460.8 Kbps
Data Bits
5, 6, 7, 8
Parity
odd, even, none, mark, space
Stop Bits
1, 1.5, 2
RS-422
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire)
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire)
Data+, Data-,GND
Isolating
2KV
Flow Control
XON/XOFF
Network Features
Network Protocols
ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
LED Indicators
Power Indicator
PWR 1(2) / Ready :
Red On : Power is on and booting up.
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly.
Green On : Power is on and functioning Normally.
Green Blinking : Located by Administrator.
10/100Base-T(X) RJ45 Port Indicator
Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs
Red : Serial port is receiving data
Green : Serial port is transmitting data
Fault Contact
Relay
Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power
Triple DC Inputs,48VDC from PoE and Dual DC inputs. 12~48VDC on 6-pin terminal block
Power Consumption (Typ.)
5.5 watts
Overload Current Protection
Present
Reverse Polarity Protection
Present
Physical Characteristics
Enclosure
IP-30
Dimensions (W x D x H)
52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)
Weight (g)
667g
Environmental
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Temperature
-10 to 70°C (14 to 158°F)
Operating Humidity
5% to 95% Non-condensin
Regulatory Approvals
EMI
FCC Part 15, CISPR (EN55022) class A,
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Warranty
5 years